Dr.-Ing. Christoph Binder (Promotion 2024)

Model-driven Basic Engineering of flexible Production Systems with the RAMI Toolbox

Betreuer: Prof. Dr.-Ing. habil. Arndt Lüder

Binder_2024_webAm 17. Januar 2024 verteidigte Herr Dr.-Ing. Christof Binder seine Promotion als Promotion in Kooperation mit der Hochschule Salzburg zum Thema "Model-driven Basic Engineering of flexible Production Systems with the RAMI Toolbox". Die Promotion wurde von Prof. Christian Neureiter (FH Salzburg) und Prof. Lüder betreut.
Zunehmende Komplexität technischer Systeme zwingt Entwurfsorganisationen vermehrt zur Nutzung moderner Entwurfsmethoden, insbesondere aus dem Bereich Model Driven Engineering. Diese stehen und fallen jedoch mit den entsprechend verfügbaren Entwurfswerkzeugen. Ein spezifisches Beispiel bilden Produktionssysteme. Hier bildet die Industrie 4.0 mit dem Referenzarchitekturmodell Industrie 4.0 einen strukturellen Rahmen.
Herr Dr.-Ing. Binder hat im Rahmen seiner Dissertation mit der RAMI-Toolbox für den Enterprise Architekt ein Softwaresystem entworfen, implementiert und validiert, dass modellbasiertes Entwerfen für Produktionssysteme auf eine neue Ebene der Effizienz heben kann.

HERZLICHEN GLÜCKWUNSCH!!

Bild: Traditionelle Magdeburger Promotionsverteidigung am Otto-von-Guericke-Denkmal

 

Kooperation

FH Salzburg

 

Publikationen

2022

  • C. Binder, A. Cala, J. Vollmar C. Neureiter, and A. Lüder, “Towards a Round-trip Engineering Approach utilizing AutomationML for developing complex Architectures of Flexible Production Systems,” in 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2022.
  • C. Neureiter and C. Binder, “A Domain-Specific, Model Based Systems Engineering Approach for Cyber-Physical Systems,” Systems, vol. 10, iss. 2, 2022.

2021

  • C. Binder, C. Neureiter, and A. Lüder, “Towards a Domain-Specific Approach Enabling Tool-Supported Model-Based Systems Engineering of Complex Industrial Internet-of-Things Applications,” Systems, vol. 9, iss. 2, 2021.
  • C. Binder, C. Neureiter, G. Lastro and A. Lüder, “Enabling model-based engineering of service-oriented Architectures within complex industrial Systems,” in 7th IEEE International Symposium on Systems Engineering (ISSE 2021), Vienna, Austria, 2021.
  • C. Binder, A. Agic, C. Neureiter, and A. Lüder, “Applying model-based Co-Simulation on modular Production Units in Complex Automation Systems,” in 7th IEEE International Symposium on Systems Engineering (ISSE 2021), Vienna, Austria, 2021.
  • C. Binder, K.Polanc, B. Brankovic, C. Neureiter, G. Lastro and A. Lüder, “Enabling model-based requirements engineering in a complex industrial System of Systems environment,” in 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2021), Västerås, Sweden, 2021.
  • B. Brankovic, C. Binder, D. Draxler, and C. Neureiter, “Towards a System-of-Systems Architecture Definition enabling Cross-Domain Embedded Vehicle Engineering,” in 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2021), Västerås, Sweden, 2021.
  • C. Binder, A. Calá, J. Vollmer, C. Neureiter, and A. Lüder, “Automated Model Transformation in modeling Digital Twins of Industrial Internet-of-Things Applications utilizing AutomationML,” in 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2021), Västerås, Sweden, 2021.
  • C. Binder, W. Leitner, O. Jöbstl, L. Mair, C. Neureiter, and A. Lüder, “Utilizing an Enterprise Architecture Framework for Model-Based Industrial Systems Engineering,” in 21st IEEE IES International Conference on Industrial Informatics, (INDIN’21), Palma de Mallorca, Spain, 2021.

2020

  • C. Binder, B. Brankovic, C. Neureiter, and A. Lüder, “Lessons Learned from developing Industrial Applications according to RAMI 4.0 by applying Model Based Systems Engineering,” in 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2020), Vienna, Austria, 2020.
  • C. Binder, K. Polanec, F. Schweiberer, C. Neureiter, G. Lastro, and A. Lüder, “Using a model-based engineering approach for developing Industrial Internet of Things applications,” in 6th IEEE International Symposium on Systems Engineering (ISSE 2020), Vienna, Austria, 2020.
  • C. Binder, D. Draxler, C. Neureiter, and G. Lastro, “Using a model-based engineering approach for developing Industrial Internet of Things applications,” in 3rd IEEE International Conference on Industrial Cyber-Physical Systems (ICPS 2020), Tampere, Finland, 2020.
  • B. Brankovic, C. Binder, D. Draxler, C. Neureiter, and G. Lastro, “Towards a Cross-Domain Modeling Approach in System-of-Systems Architectures,” in Complex Systems Design & Management, Cham, 2020, p. 164–175.
  • C. Binder, M. Fischinger, K. Polanec, J. Gross, C. Neureiter, and G. Lastro, “Towards a Tool-Based Approach for Dynamically Generating Co-Simulation Scenarios based on complex Smart Grid System Architectures,” in 15th IEEE International Conference on System of Systems Engineering (SoSE 2020), Budapest, Hungary, 2020.
  • C. Neureiter, C. Binder, B. Brankovic, and G. Lastro, “Extending the Concept of Domain Specific Systems Engineering to System-of-Systems,” in 15th IEEE International Conference on System of Systems Engineering (SoSE 2020), Budapest, Hungary, 2020.

 

Letzte Änderung: 24.01.2024 - Ansprechpartner: Webmaster